A cylindrical nickel foam part is a three-dimensional round piece. It is not a flat foam sheet, and it is not a disc or ring simply cut in the plane of a sheet. The finished outside diameter and length have to be specified together with the pore structure, and with how the cylinder is made — for example from a rolled sheet with a seam, from layers, or by cutting from a thicker piece. This guide explains those distinctions and what to send for a quotation. It is not a ranking claim or a list of fixed HuiRui catalogue numbers.
What a cylinder is — and is not
- A solid or hollow three-dimensional round part. HuiRui lists a cylindrical nickel foam product for enquiries that need a finished cylinder. The product page asks for outside diameter and axial length, and, if the part is hollow, the inside diameter or wall thickness, together with any slots or cut-outs on a drawing.
- Not a flat foam sheet. A sheet is specified by thickness, sheet size, PPI and areal mass. Those values do not, by themselves, describe a cylinder. See the nickel foam PPI guide and ultra-thin nickel foam after rolling. For general sheet material, start from the nickel foam range.
- Not a circular disc or ring cut from a sheet. A round outline in the plane of a sheet still has the thickness of that sheet. Sumitomo Electric’s Celmet product information lists laser cutting of circles, rings and other shapes, as well as saw or shear cutting and precision rolling for thickness control. Those are that manufacturer’s listed machining methods, not a description of how every HuiRui cylinder is made. They do show why a punched or laser-cut disc should not be specified as if it were a three-dimensional cylinder. HuiRui lists nickel foam for round battery parts separately when a circular sheet blank is the intended form.
- Not a generic custom outline. For non-cylindrical cut shapes, use the custom-shaped nickel foam page and send a drawing. For foam, felt or mesh as structures, see how to specify the structure.
- Name the material. Nickel and iron-nickel foam are different materials; iron-nickel is not an equivalent substitute. See iron-nickel foam. The cylindrical product page notes that N6 nickel is listed in HuiRui product information; confirm the grade and any documentation for the quoted part rather than assuming a grade from a general description.
The dimensions that belong together
Outside diameter and axial length. Give both in millimetres, with the tolerances you actually need. Length here is the height of the cylinder, not the length of a sheet before it was formed.
Solid or hollow. If the part has a bore, give the inside diameter or the wall thickness, and say which figure you are using. Do not assume that a “cylinder” is solid, and do not assume that a “tube” or “ring” is made the same way as a solid rod.
Wall thickness is not always the original sheet thickness. If the cylinder is formed from sheet, the wall is related to that sheet, but a seam, an overlap or later compression can change the local thickness. If the part is cut from a thicker piece, the wall or the solid diameter is a machined or cut dimension, not a rolled-sheet thickness. When the starting sheet matters, state its thickness and areal mass as well; the ultra-thin nickel foam guide explains why thickness should keep its processing context.
Features on the drawing. Show holes, steps, slots, chamfers and any closed or open ends. A diameter and a length alone cannot describe those features.
How published cylinders are named. Zhang, Wang and colleagues (2025) described purchased nickel foam cylinders by inner diameter, wall thickness and height — in their materials list, 60 mm inside diameter, 5 mm wall, and heights of 50, 150 and 250 mm. Those figures, and their supplier, belong to that study. They are not HuiRui stock sizes. The useful point for an enquiry is the naming: a hollow cylinder was identified by inside diameter, wall thickness and height, separately from any later coating.
Construction: the finished shape is not enough
The HuiRui cylindrical product page asks you to say whether seams, layers or rolled-sheet construction are acceptable. The finished outline does not establish how the part is made, and not every dimensional combination is produced by the same method.
A literature “cylinder” is often a formed sheet. In the experimental section of Sun, Diao and colleagues (2018), a nickel foam sheet measuring 4.0 × 9.0 cm2 was first rolled into a cylinder and then coated for a laboratory anode test. Those sheet dimensions, the coating and the degradation results belong to that experiment. They are not a HuiRui part size, and they do not identify a preferred construction for every order.
Zhang, Wang and colleagues also note that sheet membranes are often fabricated into hollow cylindrical modules for pipeline use, and that welding a flat sheet into a tube can complicate fabrication and can damage a coating already present on the sheet. That is a reason their study started from ready-made cylinders. It is not a process specification for HuiRui, and it is not a claim that every cylinder must be seamless. If a seam, an overlap or a layered wall would be a problem for mounting, flow or coating, say so on the drawing.
For the underlying sheet-foam route, see nickel foam manufacturing. That article describes how open-cell nickel foam is typically made; it does not, by itself, fix the method used to obtain a given cylinder.
PPI, mass and compression stay separate from the envelope
PPI (pores per inch) describes a linear pore-count convention. It is not an exact pore diameter, and it is not a substitute for the outside diameter or the length. See the PPI guide. If you already have a measured pore or window requirement, name the measurement method, or send a reference sample, rather than converting PPI into a guaranteed opening.
If mass, density or a compressed installed state matters, state it separately. For a part formed from sheet, include the starting sheet thickness and areal mass. A compressed or coated cylinder should not be assumed to keep the as-supplied diameter, wall or pore structure.
What to specify (and what not to copy)
Geometry. Outside diameter and axial length, with units and tolerances. If the part is hollow, inside diameter or wall thickness, and which of those you mean.
Construction. Whether a seam, an overlap, layered walls or a rolled-sheet route is acceptable, or whether you need a particular construction to be confirmed before production.
Pore structure. A PPI value or a reference sample, and a pore-size method if you already use one. Do not treat PPI as a filtration rating.
Material. Nickel grade, or iron-nickel if that is what you need, and any coating or surface condition already required.
Features and quantity. A drawing for bores, slots and ends; the sample or production quantity; and the intended use (electrode or current collector, porous support, flow-through part, or another duty), including the medium, temperature and mounting if you know them.
Do not treat product-page marketing claims, a Celmet machining list, or the literature dimensions and results above as verified performance or as a guaranteed production range for every order.
Nearby forms: a quick comparison
| Form | What it is | What to specify first |
|---|---|---|
| Cylindrical nickel foam | A solid or hollow three-dimensional round foam part | Outside diameter and length; inside diameter or wall if hollow; construction; PPI; material; drawing |
| Flat nickel foam sheet | A planar porous sheet | PPI, thickness, sheet size (43373, 43497) |
| Disc or ring cut from a sheet | A round outline in the plane of the sheet | Diameter (and inside diameter if a ring), thickness, PPI |
| Other custom-shaped foam | A non-cylindrical cut outline | Drawing, thickness and PPI (custom-shaped nickel foam) |
A cylinder used in one published cell or filter test is not a specification for every part, and it is not a reason to omit the diameter, length or construction from the enquiry.
What to send for a quote
You do not need a complete laboratory list to contact HuiRui. A sketch, a drawing, or an approximate diameter and length is enough to start. The items below help when you already have them:
- The job: electrode or current collector, porous support, flow-through part, or another use, plus the medium and temperature if you know them.
- Material and grade, and any coating or surface condition.
- Outside diameter and axial length, with tolerances.
- Whether the part is solid or hollow, and the inside diameter or wall thickness if hollow.
- Whether a seam, overlap or rolled-sheet construction is acceptable.
- PPI or a reference sample, and any mass or compression requirement.
- A drawing for slots, steps, ends or other features, and the quantity.
We review cylindrical nickel foam as listed on the product page. Feasible tolerances, construction, inspection, sample terms and lead time are confirmed in the quotation; there is no universal sheet-size minimum order for a cylindrical part. Related forms include nickel foam sheets, custom-shaped nickel foam and iron-nickel foam. Do not treat product-page marketing claims, or the literature results above, as verified performance for every design. Send the drawing and the items you already know, and we will reply with what we can make.
References
- Sumitomo Electric, Metal Foam “Celmet™” — Product Information (machining methods). https://sumitomoelectric.com/products/celmet/product-information
- S. Sun, P. Diao, C. Feng, E.-M. Ungureanu, Y. Tang, B. Hu and Q. Hu, “Nickel-foam-supported β-Ni(OH)2 as a green anodic catalyst for energy efficient electrooxidative degradation of azo-dye wastewater”, RSC Advances (2018). https://doi.org/10.1039/c8ra03039a
- Y. Zhang, Y. Wang, S. Wang, H. Xing, C. Zhang, J. Li, P. Che, C. Wang and Y. Han, “Electrodeposition of Large-Scale and Uniform Hydrophilic and Oleophobic Surfaces on Cylindrical Nickel Foam for Oil–Water Separation”, Chem & Bio Engineering (2025). https://doi.org/10.1021/cbe.5c00095