Dutch Weave Mesh: Warp, Weft and What to Specify

Dutch weave mesh — also called Dutch weave, Hollander weave or industrial woven wire filter cloth — is a woven cloth with more wires in one direction than the other, and with two different wire diameters. ASTM E2814 uses those names for this special grade of industrial woven wire cloth, intended for general filtration, including the separation of solids from fluids (liquids or gases), on the basis of a desired particle size retention. The cloth can be made from any primary metal or metal alloy wire that is suitable for weaving. It is not square-opening industrial wire cloth, not a sintered laminate by itself, and not a finished filter housing. This guide explains how to name the warp and weft counts and diameters, how to read a micron figure, and what to send for a quotation. It is not a ranking claim or a list of fixed HuiRui catalogue numbers.

What Dutch weave is — and is not

  • A filter cloth, also known as Dutch weave or Hollander weave. The official public abstract of ASTM E2814 describes this cloth as woven with a greater number of wires in one direction than the other, and utilizing two different wire diameters. In the usual arrangement the warp wires are fewer and thicker, and the weft wires — also called shute wires — are finer and packed tightly together. HuiRui lists stainless steel Dutch weave wire mesh and a precision Dutch weave filter mesh product; both pages list plain Dutch weave and twill Dutch weave, and stainless grades 304, 316 and 316L. Those grades and weave types are product-page listings; confirm the metal, weave and dimensions for the quoted piece.
  • Not square-opening woven cloth. A cloth specified by a single mesh count and a regular opening is a different construction. ASTM E2016 covers industrial woven wire cloth for general use, including the separation of particles, but its official public scope states that it does not apply to filter cloth or Dutch weave. ISO 9044:2016 defines terms and test methods for industrial woven wire cloth with square apertures used for screening; it is of limited application to cloth used for other purposes, and alternative requirements may be agreed between the purchaser and the supplier. Do not apply a square-opening calculation to a Dutch weave without checking the actual pore geometry. See nickel mesh open area and porosity and selecting nickel mesh for mechanical particle filtration.
  • Not automatically a sintered Dutch weave, and not the same as every multilayer sintered mesh. Unsintered Dutch weave is a single woven cloth. A sintered part that includes Dutch weave is a different item: the wires have been bonded, usually in more than one layer. HuiRui lists a sintered Dutch weave mesh product for that construction; the listing describes a vacuum-sintered stack in which the fine layer is typically Dutch weave, with coarser protection or support layers around it. If the drawing needs that stack, or only an unsintered cloth, say which one you mean. A sintered laminate whose layers are specified as square-opening mesh is covered separately in multilayer nickel sintered mesh.
  • Name the metal and the grade. ASTM E2814 allows any metal or alloy wire that is suitable for weaving; it does not fix stainless steel as the only option. If you need nickel, titanium or another alloy, write the designation you already have. The titanium woven wire mesh guide notes that HuiRui lists plain, twill or Dutch weave among the weave options on the titanium wire mesh product page; confirm the weave and grade per enquiry rather than assuming a stainless listing can be copied onto another metal.

The dimensions that belong together

The fields below belong in the same enquiry. They describe how to name the cloth; they are not a HuiRui stock list.

Mesh counts in both directions. Dutch weave is commonly written as warp × weft — for example 24×110. A single mesh-count label is not enough, and two cloths that share only one of the two counts should not be treated as interchangeable. The precision product page lists example combinations of 24×110, 22×150, 100×800 and 165×1400. Treat those figures as product-page listings, not as a closed catalogue or as implied micron ratings.

Wire diameters in both directions. Give the warp diameter and the weft diameter, with units. The same page lists typical wire diameters next to those mesh counts: 0.35 × 0.25 mm for 24×110, 0.25 × 0.18 mm for 22×150, 0.10 × 0.07 mm for 100×800, and 0.07 × 0.04 mm for 165×1400 (warp × weft in each case). The more general Dutch weave product page lists a wire-diameter range of 0.025 mm to 0.5 mm and a thickness range of 0.1 mm to 1.2 mm. All of those figures are listings; confirm the diameters, and any thickness limit, for the quoted cloth.

Weave type. Name whether the cloth is a plain Dutch weave or a twill Dutch weave. In a plain Dutch weave the weft passes over one and under one warp wire; in a twill Dutch weave the weft passes over two and under two. HuiRui lists both types. Do not treat them as interchangeable. If a reverse configuration is what your drawing requires — the usual warp and weft diameter relationship is reversed — name that explicitly. It is not assumed from a plain or twill listing.

Material and grade. Name the metal and grade, and any surface condition already required. The stainless product pages list 304, 316 and 316L.

Finished size or part shape. Give roll width and length, a cut-sheet size, or a drawing for discs, tubes or other fabricated pieces. One product page lists roll widths of 0.5 m to 2.5 m and formats that include rolls, cut-to-size sheets, discs and filter tubes; the precision page lists a common width range of 0.5–1.5 m, with other sizes available, and supply as rolls or cut-to-length sheets. Those are listings, confirmed per enquiry.

Filtration intent and rating method. Say what the cloth has to do (for example liquid or gas filtration, or a layer inside a filter element), and the fluid you already know. If you already have a micron or pore-size figure, name the method behind it. A mesh-count label, a square-opening width and a filtration rating are not interchangeable.

How to read a micron figure

A micron number is easy to copy into a purchase order, but it is only as meaningful as the method behind it.

ASTM E2814 presents alternative acceptance criteria based on a desired pore size, or micron retention filtration rating. If your specification already uses such a rating, write the value as it is reported and name the method. Do not convert a warp × weft mesh count into a micron rating by using a square-opening formula.

ASTM E3278 is a test method for the bubble point pressure of woven wire filter cloth of the kind covered by E2814. Its official public description is a capillary-flow test: it measures the pressure required to force an air bubble through a flat specimen of the cloth wetted under a test liquid of known surface tension, and the pressure is inversely proportional to the pore size. The same public text states that users commonly wish to convert that pressure to an absolute filtration rating in micrometres, and that the calculation requires a valid tortuosity or conversion factor. The test is conducted on sample material cut from a woven roll of cloth. A bubble-point test on a finished, fabricated filter unit is outside the scope of E3278; if that is what you need, the geometric test parameters have to be agreed explicitly as a custom method.

One HuiRui Dutch weave product page lists a micron rating range of 5–120 microns, and the sintered Dutch weave page lists 1–50 µm. Treat those figures as product-page listings, not as verified, method-backed ratings for every piece, and not as a substitute for naming the test you actually use.

What to specify (and what not to copy)

Construction. State that the item is unsintered Dutch weave filter cloth, or a sintered laminate that includes a Dutch-weave layer, or a square-opening woven mesh — not an unspecified “filter mesh.”

Warp and weft. Give mesh counts and wire diameters in both directions, not a single mesh-count label.

Weave type. Plain Dutch or twill Dutch, or another named configuration if that is what the drawing requires.

Material. Name the grade. If you need a metal other than the stainless types listed on the Dutch weave product pages, say so explicitly.

Size or drawing. Width and length, or the finished part shape and quantity.

Filtration method. If you already have a rating, name the standard or test (for example a bubble-point measurement on flat cloth under ASTM E3278) and the value as reported. Do not treat a product-page micron range, or a square-mesh opening, as that rating.

Do not treat product-page marketing claims, listed micron ranges, or the standard scopes above as verified performance or as a guaranteed production range for every order.

Nearby forms: a quick comparison

Form What it is What to specify first
Dutch weave (unsintered filter cloth) Woven cloth with unequal warp and weft counts and two wire diameters Warp and weft mesh counts, both wire diameters, weave type, material, size or drawing; rating method if you already have one
Square-opening woven mesh Interlaced wires that form a regular opening Mesh count, wire diameter, weave, opening (21806, 32196, 43415)
Sintered Dutch weave A sintered multilayer laminate that typically uses a Dutch-weave filtration layer Layer stack, overall thickness, material, finished form; say if the fine layer is Dutch weave (product page)
Multilayer sintered mesh A sintered stack of woven meshes, specified per layer Layers and mesh count (and weave) per layer; overall thickness (43513)
Expanded metal A slit-and-stretched sheet, not a woven cloth LWD, SWD, strand and thickness (43510)

A micron figure obtained on a flat cloth sample is not automatically the rating of a finished filter element, and it is not a reason to omit the warp and weft dimensions from the enquiry.

What to send for a quote

A full test protocol is not required for the first message. A sketch, a drawing, or an approximate warp × weft description is enough to start a HuiRui enquiry. The items below help when you already have them:

  1. The job: liquid or gas filtration, a layer in a filter element, or another use, plus the fluid if you know it.
  2. Material and grade, and any surface condition.
  3. Weave type: plain Dutch, twill Dutch, or another named configuration.
  4. Mesh counts and wire diameters in both the warp and weft directions.
  5. Roll or sheet size, or a drawing for discs, tubes or other parts, and the quantity.
  6. Any filtration rating you already use, with the method named, or a reference sample.

We review Dutch weave enquiries against the stainless steel Dutch weave and precision filter mesh listings. Mesh counts, wire diameters, weave type, grade, width and finished form are confirmed per enquiry. Related constructions include sintered Dutch weave mesh, titanium woven wire mesh and multilayer nickel sintered mesh. The open-area guide and the structure overview of foam, felt or mesh remain useful when you are still choosing a form. Do not treat product-page marketing claims, listed micron ranges, or the standard scopes above as a guaranteed result for every design. Send the drawing and the details you already have, and we will reply with what we can make.

References

Contact us Form

Leave us a message — we’ll reply within 30 minutes!
Please feel free to leave your message here, or send an email to tzx@nickelfoam.com

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Start typing to see products you are looking for.

Contact us

Leave us a message — we’ll reply within 30 minutes!
Please feel free to leave your message here, or send an email to tzx@nickelfoam.com

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

*We respect your confidentiality and all information are protected.

Contact us

Leave us a message — we’ll reply within 30 minutes!
Please feel free to leave your message here, or send an email to tzx@nickelfoam.com

"*" indicates required fields

This field is for validation purposes and should be left unchanged.

*We respect your confidentiality and all information are protected.